Making sure the salt tank is filled in your water softener is vital and is required to ensure your equipment performs consistently. The salt is what provides the brine solution that clean the resin-beads inside the water softener as they become dirty from the removal of the contaminants in the water. When the salt is missing, the process of cleaning cannot be performed. This results in dirty water that passes through your system, which flows into your business or your home.

This process may seem straightforward, yet many home owners don’t know that when this occurs repeatedly, resin beads will become coated and this coating cannot be removed. This will eventually result in the softener operating incorrectly when it comes to absorbing dirty water. A major service will then be a requirement in order to return the system to an operational state.

What Role Does Salt Play In The Softening Process?

Salt in the system is what cleans resins inside the softener after the process of regeneration. The salt should be sitting in at least 1cm of water all the time. The salt amount used inside the water softener is dependent on water hardness levels in the area as well as how many people live in your home. The average estimation will be that the softener will require a 4-kg salt block for each person every month.

Softening Salts

When it comes to water softening, there are 3 salt types typically sold. These include:

• Evaporated Salt

• Solar Salt

• Rock Salt

Rock salts in mineral form, occurs naturally inside the ground. This salt is obtained from mining methods under the ground. Rock salt is made up of either 98 or 99% sodium chloride. Solar salt is obtained through the process of evaporating seawater. This salt contains 85% sodium chloride. This salt is typically available in crystal-form or in some cases pellets. Evaporated salt comes from salt deposits that are mined from underground from dissolving salt. Moisture will then be evaporated out of the salt using energy that comes from coal or gas. The evaporated salt is made up of 99.6 to 99.99% sodium chloride.

What Type Of Salt Is Best For A Water Softener?

The rock salts contain matter which is not water-soluble. Using this salt type will mean that the softening reservoirs will need to be cleaned more frequently. However, the rock salt is cheaper when compared to solar or evaporated salt, but cleaning out the reservoir does require energy and time.

The solar salt is made up of slightly more water-insoluble matter when compared to evaporated salt. When deciding on the right salt for your water softener, think about the amount of salt that your system uses, the design of the softener and how frequently does your softener require a cleanout. If the usage of salt is low, you can alternate your products. But when you use a lot more salt, the insoluble salts build-up faster when you use solar salt. In addition, your reservoir will require more regular cleaning. If this is the case, then evaporated salt is the best choice. Get to know more at WWW.WATERSOFTENERGURUS.COM